English
+381 (11) 422-15-80 / BelgradeFree engineering consultation

Ultrakustik-Tape M100

It is used as an elastic vibroisolating liner at the joints of soundproof structures components with adjacent surfaces. Reduces the transmission of structural and shock noise, increases the effectiveness of soundproofing structures.

Another width option: Ultrakustik-Tape M150 Request Price
Ultrakustik Tape

High Efficiency with Low Thickness

The layered porous structure of the tape is designed to dissipate sound energy. Each layer is a barrier to noise entering the insulated room.

For maximum results, it is recommended to use Ultrakustik VS tape with acoustic sealant. Together they increase the effectiveness of soundproofing structures by 5 dB!

Performance Stability

Ultrakustik Tape M100 maintains stable high soundproofing characteristics under static and dynamic loads over its long service life.

Easy-to-use

Ultrakustik Tape M100 can be easily cut with a standard construction knife. 100 mm (4 in) wide tape is perfectly suitable for most types of soundproofing structures, including ZIPS and ZIPS Floor panel systems, framed soundproof partitions, cladding, and suspended ceilings.

Features of the material usage, ready-to-use soundproofing structures and examples of implemented projects can be found in the "Usage" tab.
Go to the tab

What Ultrakustik Tape is Best for Myself?

NameWidth, mmRoll length, mRoll weight, kgApplication
Ultrakustik Tape M100 100 30 1 Applicable with any soundproofing structures with a thickness not exceeding 100 mm (4 in)
Ultrakustik Tape M150 150 30 1,5 Applicable with any soundproofing structures with a thickness not exceeding 150 mm (6 in)

Maintenance info

Ultrakustik Tape M100 Composition

Ultrakustik Tape M100 is made of high quality multilayer soundproof glass-fiber mat.

Storage

Ultrakustik Tape should be stored in its original packaging in dry premises away from any precipitation and groundwater.

Features of the material usage

Ultrakustik Tape M100 is used as a cushioning material in building structures during the installation of ZIPS, ZIPS Floor panel systems, framed soundproof partitions, claddings, and suspended ceilings, as well as an edge layer in soundproof floating floor structures.

Ready-to-use constructions with Ultrakustik-Tape M100

Frameless wall cladding ZIPS III-ULTRA

Thickness: 55 mm
ΔRw ≈ 18 dB
Max. load: 6 kg/m2

Soundproofing frame partition on a 55 mm frame

Thickness: 108 mm
ΔRw ≈ 60 dB
Max. load: 35 kg/r.m.

Frameless wall cladding ZIPS-4

Thickness: 55 mm
ΔRw ≈ 19 dB
Max. load: 35 kg/r.m.

Soundproofing frame partition on a 75 mm frame

Thickness: 133 mm
ΔRw ≈ 62 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS III-ULTRA

Thickness: 55
ΔRw ≈ 18 dB

Frameless wall cladding ZIPS Vector

Thickness: 53 mm
ΔRw ≈ 14 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Vector

Thickness: 53 mm
ΔRw ≈ 14 dB
Max. load: 6 kg/m2

Under the finish coating with the use of ZIPS Floor Modul

Thickness: 110 mm
ΔRw ≈ 9 dB
Max. load: 320 kg/r.m.

Frame lining using versalite vibroinsulating hang Ultrakustik Connect

Thickness: 90 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Modul

Thickness: 83 mm
ΔRw ≈ 18 dB
Max. load: 6 kg/m2

Under the finish coating with the use of ZIPS Floor Vector

Thickness: 85 mm
ΔRw ≈ 8 dB
Max. load: 320 kg/r.m.

Frameless wall cladding ZIPS Modul

Thickness: 83 mm
ΔRw ≈ 18 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Cinema

Thickness: 133 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frameless wall cladding ZIPS Cinema

Thickness: 133 mm
ΔRw ≈ 21 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS 4

Thickness: 55 mm
ΔRw ≈ 19 dB
Max. load: 6 kg/m2

Frame soundproofing ceiling on hangers Ultrakustik Connect

Thickness: 130 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)

Thickness: 53 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frameless wall cladding ZIPS Slim

Thickness: 37,5 mm
ΔRw ≈ 11 dB
Max. load: 35 kg/r.m.

Independent frame cladding on coupled profile 50 mm

Thickness: 90 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
See all

Physical Properties

Roll length:
30 m (98 ft.)
Tape width:
100 mm (4 in)
Thickness:
4 mm (0.15 in)
Roll weight:
1 kg (2.2 lbs.)

Acoustic Characteristics

Surface density
300 g/m2 (1 oz.ft2)
Dynamic elasticity modulus, unit:
At a load of 2 kPa - 0.18 MPa
At a load of 5 kPa - 0.35 MPa
Relative compression ratio ɛ:
At a load of 2 kPa - 0.025
At a load of 5 kPa - 0.35

Downloads

Product Information

Technical information

Features of the material usage, ready-to-use sound-proofing structures and examples of implemented projects can be found in the "Usage" tab.
Go to the tab

Didn't find what you were looking for? Just ask us!

Ask your question

If you couldn't find an answer to your question on this page, don't worry. Ask us and we will respond as soon as possible. We usually answer questions during the working day. You can also leave a review about the material. Your opinion is very important to us!
Ask question Leave review

Assessment

Questions/reviews from site visitors

Please note! In order to avoid spamming the page, questions are pre-moderated before publication. Therefore, the submitted question does not appear on the page immediately.
Anita 27 January 2023
Why use Ultrakustik VS with Ultrakustik Tape M100?
Expert answer

To achieve maximum sound insulation results, we recommend using Ultrakustik VS during installation and for sealing joints.

Mirko 27 January 2023
Can Ultrakustik Tape M100 be used in one layer?
Expert answer

Using Ultrakustik Tape M100 in one layer is not recommended to avoid lower effectiveness.

Ana 27 January 2023
Can I wrap heating pipes with Ultrakustik Tape M100?
Expert answer

Yes, you can use Ultrakustik Tape M100 to wrap heating pipes.