English
+381 (11) 425-10-59 / BelgradeFree engineering consultation

Frameless ceiling cladding ZIPS 4

Overview

The structures of frameless soundproof linings are used in construction and renovation of buildings of any type and purpose for additional sound insulation of single-layer massive walls and ceilings. They have high values of weighted sound reduction index improvement of air noise and low level of radiated sctuctural noise.

Other constructions in this section

You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.

Show estimation for
Just input your area. The estimate is recalculated automatically.

Specialized sound insulation materials:

Material
Quantity
Unit of measurement
ZIPS-4
sandwich panel 1200x600x42,5 mm with a mounting kit
1 1.38
-
pc

Specialized accessories:

Material
Quantity
Unit of measurement
Ultrakustik TAPE M100
vibration damping spacer roll 30 m, width 100 mm thickness 4 mm (3 m2)
1 0.067
-
pc
Ultrakustik VS
silicone neutral sealant 290 ml cartridge
1 0.31
-
pc

General construction materials:

Material
Quantity
Unit of measurement
Gypsum plasterboard
sheet 2000 х 1200 х 12,5 mm
1 0.67
-
pc
  • ZIPS-4 panels are attached to the wall only through the existing vibrating units using plastic dowels.
  • With the use of standard mounting kit, it is possible to level out differences and slopes of the surface up to 20 mm.
  • With the use of additional self-adhesive ST spacers, differences of up to 50 mm can be compensated. In this case it is also necessary to use universal self-tapping screws of greater length to fix the panels.
  • To achieve the declared features, the ZIPS-4 system must be mounted in strict accordance with the manual.