- Problems & Solutions
- Solutions
- Soundproofing of walls
- Independent frame cladding on coupled profile 50 mm
Independent frame cladding on coupled profile 50 mm
Thickness: 90 mm
ΔRw ≈ 24 dB
When applied?
- When you need to level the wall and do not want to deal with wet processes, but when the noise of medium volume interferes: conversations, TV, barking dog.
- To achieve the maximum effect, it is mounted on soundproofing bases: “floating” floor, soundproofing ceiling.
Other constructions in this section
Frameless wall cladding ZIPS III-ULTRA
Frameless wall cladding ZIPS-4
Frameless wall cladding ZIPS Vector
Frame lining using versalite vibroinsulating hang Ultrakustik Connect
Frameless wall cladding ZIPS Modul
Frameless wall cladding ZIPS Cinema
Frameless wall cladding ZIPS STS
Frameless wall cladding ZIPS Slim
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Show estimation for
m²
Just input your area. The estimate is recalculated automatically.
Specialized sound insulation materials:
Material
Quantity
Unit of measurement
Specialized accessories:
Material
Quantity
Unit of measurement
General construction materials:
Material
Quantity
Unit of measurement
Gypsum plasterboard
sheet 2000 х 1200 х 12,5 mm
-
pc
Profile Gyproc-Standard PP 60/27
length 3 r.m.
-
pc
Profile Gyproc-Standard PPN 28/27
length 3 r.m.
-
pc
- The frame of the soundproofing cladding is mounted with a distance of 10 mm from the insulated wall. Elements of soundproofing cladding adjoin the enclosing structures exclusively through two layers of Ultrakustik TAPE M100 vibration-damping spacer.
- ZIPS-dB and gypsum plasterboard sheet cladding materials are installed to the frame with a stagger between joints. Upon completion of soundproofing framed cladding installation, the excess of protruding Vibrostek TAPE M100 tape is cut off and the resulting joint is filled with Ultrakustik VS.