English
+381 (11) 422-15-80 / BelgradeFree engineering consultation

Materials

The main function of soundproofing materials and structures is to reduce the noise level in the room. But, at the same time, the use of certain materials can significantly reduce costs at other stages of refurbishment.


The process of surfaces leveling is not only expen - sive, but also a time-consuming stage of refurbishment and construction work.


We have developed special solutions for uneven surfaces: ZIPS-4 for walls and ceilings, Ultrakustik Floor Plast - for floors. Our materials allow to level small surface differences and perform installation without additional preparation, which significantly reduces the time of refurbishment work.


In the case when the wall or floor has large height differences, we recommend framed soundproofing structures. These are the structures with a distance from the existing wall, and the finish layer - gypsum board - is a good base for any decorative coatings.

Sound and noise insulation

Decorative acoustic materials belong to a special category of construction finishing materials. They are used not only to get respectable interior, but also to provide good acoustics. Specialized acoustic ceiling and wall panels, depending on objectives set, are capable of absorbing or reflecting sound effectively. Preliminary design of acoustic project or an advice of acoustic engineer is recommended prior to the use of materials of this category.

Decorative acoustic materials

Greenlam HPL panels (India) are used both in interiors (wall cladding, partitions, tables, furniture solutions) and for the arrangement of ventilated facades of buildings with fire safety requirements.


Due to the slow passage and extremely low moisture absorption, the panels do not develop structural changes from temperature changes and other climatic changes. And since their decorative layer is impregnated with a special composition (Greenlam collection), even in the far north and sunny south, the panels will look like new in less than 15 years. HPL Greenlam does not absorb dirt, the surface of the panels is not much abraded with plain water with the addition of standard products.


The thickness of the material is from 4 to 12 mm (depending on the collection and decor).

Exterior materials