- Problems & Solutions
- Solutions
- Sound insulation of ceilings
- Frameless ceiling cladding ZIPS III-ULTRA
Frameless ceiling cladding ZIPS III-ULTRA
Thickness: 55
ΔRw ≈ 18 dB
When applied?
- If you need maximum effect with the smallest thickness.
- Saves from noises of average volume - conversations, TV, barking dogs, crying children.
Overview
The structures of frameless soundproof linings are used in construction and renovation of buildings of any type and purpose for additional sound insulation of single-layer massive walls and ceilings. They have high values of weighted sound reduction index improvement of air noise and low level of radiated sctuctural noise.
Other constructions in this section
Stretch ceiling filled with Ultrakustik GW-Eco
Frameless ceiling cladding ZIPS Vector
Frameless ceiling cladding ZIPS Modul
Frameless ceiling cladding ZIPS Cinema
Frameless ceiling cladding ZIPS 4
Frame soundproofing ceiling on hangers Ultrakustik Connect
Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Show estimation for
m²
Just input your area. The estimate is recalculated automatically.
Specialized sound insulation materials:
Material
Quantity
Unit of measurement
Specialized accessories:
Material
Quantity
Unit of measurement
General construction materials:
Material
Quantity
Unit of measurement
Gypsum plasterboard
sheet 2000 х 1200 х 12,5 mm
-
pc
- ZIPS-III-Ultra panels are fixed to the ceiling through 8 vibration units. Metal anchor screws from the mounting kit are inserted into the two central vibration units. Shortened anchor screws are used for mounting on hollow slabs.
- The head of the screw should be screwed into the vibration unit no deeper than 1-2 mm from the level of the front side of the panel.
- For the first panel, adjacent to the walls, the ridges are cut along the short and long sides, for the next panels of the first row - only along the long side.
- The ends of the sandwich panels must adjoin the side walls through two layers of Ultrakustik TAPE vibration insulating tape. The tape is glued and fixed with Ultrakustik VS sealant.
- If the panel is cut, all available attachment points are used for installation. Cuttings less than 250 mm are not used in the installation.
- The joints between the sandwich panels are treated with Vibrosil sealant. The finishing layer of gypsum plasterboard sheets 12.5 mm thick is fixed to the resulting surface. Sheets must adjoin to the walls through 2 layers of Ultrakustik TAPE vibration insulating tape.
- Excessively protruding Ultrastik TAPE is cut flush with the finishing layer of gypsum plasterboard sheets. Seams are filled with Ultrastik VS vibroacoustic sealant.