- Problems & Solutions
- Solutions
- Soundproofing of walls
- Frame lining using versalite vibroinsulating hang Ultrakustik Connect
Frame lining using versalite vibroinsulating hang Ultrakustik Connect
Thickness: 90 mm
ΔRw ≈ 24 dB
When applied?
- When you need a smooth wall with maximum rigidity, while big noise from conversations, TV, a rodking dog or crying children interferes.
- Mounted on a soundproofing floor and suspended soundproofing ceiling.
Overview
The thinnest frame cladding system on vibration fasteners. The height is up to 8 meters.Other constructions in this section
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Specialized sound insulation materials:
Specialized accessories:
General construction materials:
PP 60/27 metal profiles are fixed to the insulated wall with the help of special Ultrakustik Connect vibration insulating hangers. Vibration insulating hangers are installed with a pitch of not more than every 1.5 running meters of the stud, but not less than 3 pieces with a channel length of up to 3 meters.
Mount the fasteners at a distance of no more than 150 mm from the edge of the channel. PPN 28/27 metal channels are fixed to the enclosing structures of the floor, ceiling and side walls through two layers of Ultrakustik TAPE M100 soundproofing spacing.
ZIPS-dB and gypsum plasterboardsheet cladding materials are installed to the frame with a distance between joints. Upon completion of soundproofing framed lining installation, the excess of protruding Ultrakustik TAPE M100 tape is cut off and the resulting joint is filled with Ultrakustik VS.