English
+381 (11) 425-10-59 / BelgradeFree engineering consultation

Soundproofing frame partition on a 75 mm frame

Overview

The structures of soundproofing framed partition walls are used in construction and renovation of buildings of any type and purpose. They are characterized by high values of insulation of air noise and low level of radiated structural noise.

Other constructions in this section

You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.

Show estimation for
Just input your area. The estimate is recalculated automatically.

Specialized sound insulation materials:

Material
Quantity
Unit of measurement
ZIPS-dB, GFB
sheet 1200х1200х16.5 mm
1 1.4
-
pc
Ultrakustik GW-Neo
acoustic glasswool-fiber board plate 1200x600x50 mm
1 0.34
-
pc

Specialized accessories:

Material
Quantity
Unit of measurement
Ultrakustik VS
silicone neutral sealant 290 ml cartridge
1 0.31
-
pc
Ultrakustik TAPE M100
vibration damping spacer roll 30 m, width 100 mm thickness 4 mm (3 m2)
1 0.067
-
pc

General construction materials:

Material
Quantity
Unit of measurement
Gypsum plasterboard
sheet 2000 х 1200 х 12,5 mm
1 0.67
-
pc
Profile Gyproc-Standard PP 50/40
length 3 r.m.
1 1.34
-
pc
Profile Gyproc-Standard PP 50/37
length 3 r.m.
1 0.24
-
pc
  • The frame soundproofing partition should adjoin the enclosing structures exclusively through two layers of Ultrakustik TAPE M150 vibration-damping spacer.
  • PS 75/50 metal channels are installed with a pitch of 600 mm. The channels are connected to each other according to “back to back” principle.
  • ZIPS-dB and gypsum plasterboard sheet lining materials are attached to the frame with a distance between joints. Upon completion of soundproofing framed lining installation, the excess of protruding Ultrakustik TAPE M100 tape is cut off and the resulting joint is filled with Ultrakustik VS.