- Materials
- Sound and noise insulation
- Specialized accessories
- Ultrakustik Connect
Ultrakustik Connect
Ultrakustik Connect is a universal vibroisolating hanger solution for metal framed suspended ceiling constructions and wall claddings. Request PriceUniversal Vibroisolating Hanger
Ultrakustik Connect is used to reduce transmission of vibrations into building enclosing structures when installing metal framed suspended ceilings and wall claddings.
It is more efficient than standard hangers
Use of Ultrakustik Connect reduces the noise level in an isolated room by 25% compared to traditional hangers.
This means that, on average, the use of the Ultrakustik Connect vibroisolating hanger in sound insulating structures increases the airborne noise insulation index of the entire structure by 2 dB.
Stable Vibroisolating Properties
A combination of polyurethane elastomers Sylodyn and Sylomer manufactured by Getzner is used as an elastic hanger element, which allows Ultrakustik Connect to retain its vibroacoustic properties for more than 30 years.
Video content for Ultrakustik Connect
Ultrakustik Floor 100Hydro
Ultrakustik Floor Plast
ULTRAKUSTIK - Sound insulation accessories
Maintenance info
Composition and description
Metal housing.
A combination of Sylodyn/Sylomer elastomers is used as a working vibroisolating element in the hanger structure.
Storage
Ultrakustik Connect hangers should be stored in their original packaging away from any precipitation and groundwater.
Features of the material usage
Ultrakustik Connect has elongated hanger shelves, which allows adjusting a gap between the sound-insulating structure frame and the wall surface to 150 mm (6 in).
Ready-to-use constructions with Ultrakustik Connect
Frame lining using versalite vibroinsulating hang Ultrakustik Connect
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
Frame soundproofing ceiling on hangers Ultrakustik Connect
ΔRw ≈ 21 dB
Max. load: 6 kg/m2
Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)
ΔRw ≈ 21 dB
Max. load: 6 kg/m2
Independent frame cladding on coupled profile 50 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
Physical Properties
Downloads
Product Information
Technical information
Didn't find what you were looking for? Just ask us!
Ask your question
If you couldn't find an answer to your question on this page, don't worry. Ask us and we will respond as soon as possible. We usually answer questions during the working day. You can also leave a review about the material. Your opinion is very important to us!Questions/reviews from site visitors
The effectiveness of a soundproof structure depends on a set of factors. One of them is the vibration isolation of the structure. The less rigid connections the cladding/suspended ceiling has, the better the result. The vibroisolating hanger allows fixing a structure in such a way that vibration is not transmitted through the fasteners.
The shrinkage does not change over time. After the structure installation, the shrinkage persists.
A 60x27 profile fragment of the desired length is inserted into the hanger. To connect the profile fragment with the main 60x27 profile, a standard straight hanger cut into two parts is used.
Yes, it is a universal hanger. It is used in soundproof ceiling constructions and in frame claddings.