Ultrakustik VS
Ultrakustik VS acoustic sealant features the best vibroisolating properties and is used to reduce transmission of vibration and sound through building structures, while increasing their soundproofing. It is one-component neutral silicone sealant. Request PriceAcoustic Sealant
Ultrakustik VS is a neutral vibration isolation silicone sealant.
High level of sealing
Ultrakutik VS acoustic sealant completely fills seams and joints, providing a high level of vibration isolation.
It does not tend to crack, crumble, reliably seals seams of any size and depth.
It is resistant to moisture, temperature changes, and solar radiation.
Stable elasticity
Ultrakustik VS retains elasticity and firmness after drying and under load. Over time, it does not crack and does not peel off, while continuing to effectively prevent sound from entering the isolated premises.
Excellent Adhesion
Ultrakustik VS has excellent adhesion to a wide range of surfaces and materials.
Easy to apply on horizontal, vertical and inclined surfaces.
Ultra Effect in Combination with Ultrakustik Tape
To achieve maximum protection against propagation of structural vibrations through structural elements, it is recommended to use Ultrakustik VS together with Ultrakustik Tape.
By eliminating rigid connections and sealing joints with the use of Ultrakustik VS and Ultrakustik Tape, sound insulation increases by 5 dB!
Features
The sealant is easy to use. Its consumption is controlled using a special conical nozzle.
Ultrakustik VS is not aggressive to metal and other materials, has good adhesion, and dries quickly. It is resistant to moisture, sunlight, and temperature changes.
After hardening, the sealant has no smell and is completely safe to use.
Video content for Ultrakustik VS
Maintenance info
Composition and description
Made from silicone resins and silicon-containing modifying additives.
Storage
Ultrakustik VS sealant tubes should be stored in dry enclosed spaces away from any precipitation and groundwater at temperatures from +5 to +25°C (41°F - 77°F).
The sealant may be stored in closed cardboard boxes stacked no higher than 2 m (6.6 ft.).
Features of the material usage
Ultrakustik VS acoustic sealant is used to fill joints in the structures of soundproof floating floors, ZIPS panel system, frame soundproofing partitions, claddings, and suspended ceilings.
All activities should take place in ventilated areas. Avoid getting uncured sealant in the eyes or on the skin. In case of contact with mucous membrane or the eyes, rinse immediately with plenty of water.
Ready-to-use constructions with Ultrakustik VS
Frameless wall cladding ZIPS III-ULTRA
ΔRw ≈ 18 dB
Max. load: 6 kg/m2
Soundproofing frame partition on a 55 mm frame
ΔRw ≈ 60 dB
Max. load: 35 kg/r.m.
Hydro-soundproofing floor with the use of Ultrakustik-100 Hydro
Max. load: 320 kg/r.m.
Frameless wall cladding ZIPS-4
ΔRw ≈ 19 dB
Max. load: 35 kg/r.m.
Soundproofing frame partition on a 75 mm frame
ΔRw ≈ 62 dB
Max. load: 35 kg/r.m.
Frameless ceiling cladding ZIPS III-ULTRA
ΔRw ≈ 18 dB
Soundproofing floor with the use of Ultrakustik Floor Plast
ΔRw ≈ 9 dB
Max. load: 320 kg/r.m.
Frameless wall cladding ZIPS Vector
ΔRw ≈ 14 dB
Max. load: 35 kg/r.m.
Frameless ceiling cladding ZIPS Vector
ΔRw ≈ 14 dB
Max. load: 6 kg/m2
Under the finish coating with the use of ZIPS Floor Modul
ΔRw ≈ 9 dB
Max. load: 320 kg/r.m.
Frame lining using versalite vibroinsulating hang Ultrakustik Connect
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
Frameless ceiling cladding ZIPS Modul
ΔRw ≈ 18 dB
Max. load: 6 kg/m2
Under the finish coating with the use of ZIPS Floor Vector
ΔRw ≈ 8 dB
Max. load: 320 kg/r.m.
Frameless wall cladding ZIPS Modul
ΔRw ≈ 18 dB
Max. load: 35 kg/r.m.
Frameless ceiling cladding ZIPS Cinema
ΔRw ≈ 21 dB
Max. load: 6 kg/m2
Frameless wall cladding ZIPS Cinema
ΔRw ≈ 21 dB
Max. load: 35 kg/r.m.
Frameless ceiling cladding ZIPS 4
ΔRw ≈ 19 dB
Max. load: 6 kg/m2
Frame soundproofing ceiling on hangers Ultrakustik Connect
ΔRw ≈ 21 dB
Max. load: 6 kg/m2
Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)
ΔRw ≈ 21 dB
Max. load: 6 kg/m2
Frameless wall cladding ZIPS Slim
ΔRw ≈ 11 dB
Max. load: 35 kg/r.m.
Independent frame cladding on coupled profile 50 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
Physical Properties
Downloads
Product Information
Technical information
Didn't find what you were looking for? Just ask us!
Ask your question
If you couldn't find an answer to your question on this page, don't worry. Ask us and we will respond as soon as possible. We usually answer questions during the working day. You can also leave a review about the material. Your opinion is very important to us!Questions/reviews from site visitors
Vibration isolation is one of the most important aspects in building a soundproof structure. Ultrakustik VS remains elastic and does not harden.
As a rule, the consumption is as follows: 1 tube per 4-5 meters (13-16 ft.) of seam.
No. Ultrakustik VS sealant has a special composition for better adhesion to soundproof structure materials. Also, conventional silicone sealant has high dynamic stiffness values, which negatively affects its damping properties.