ZIPS STS
ZIPS STS panels deal effectively with the majority of household noises typical of apartment buildings.
They are designed specifically to eliminate resonant vibrations of thin and lightweight partitions.
Additional sound insulation up to 10 dB for thin tongue-and-groove partitions or partitions made of AAC blocks
ZIPS STS panels feature low thickness and weight and provide a significant increase in sound insulation over a wide frequency range, improving inherent sound insulation of a thin building structure by 10 dB.
Low Thickness of the Panel
Mounted ZIPS STS panels do not alter visual perception of space volume.
Due to low thickness of 23 mm (1 in), the panels allow to save as much as possible of the useful space.
Easily Installed
The anti-resonance operating principle of the ZIPS STS panels does not involve the use of elastic liners and acoustic sealant in the soundproof structure. Fastening joints are sealed with ordinary putty, which greatly facilitates installation and reduces costs, offering good soundproofing properties.
The panels are mounted directly on the base without preliminary wall preparation.
Features
Thin partitions are sheathed with the ZIPS STS panels only on one side.
Sheathing on both sides provides no tangible result. The additional soundproofing effect is significantly manifested after sheathing on one side and does not increase when a layer is added on the backside of the partition.
ZIPS STS can be used in residential and industrial premises.
Video content for ZIPS STS
Zips SLIM - The thinnest sound insulation that works
ZIPS - Installation
ZIPS - Sound insulation panel system
Sound insulation panels - ZIPS-DB
ZIPS Slim - Review VR
ZIPS-4 - Review VR
Maintenance info
Composition and description
Gypsum fiber tongue-and-groove element (thickness 20 mm (0.8 in))
Multilayer glass-fiber mat (thickness 3 mm (0.1 in))
The product is mounted on the surface through compensating washers
Storage
ZIPS STS panels should be stored in dry enclosed spaces on lined materials to avoid sagging.
Features of the material usage
ZIPS STS can be used in residential and industrial premises on either side of a thin partition with a thickness of not more than 100 mm (4 in).
It is not recommended to use the system on partitions less than 80 mm (3 in) thick.
Ready-to-use constructions with ZIPS STS
See allPhysical Properties
Acoustic Properties
Airborne Sound Insulation

Additional airborne sound insulation index of the ZIPS STS panel system: △Rw up to 10 dB
Measurement results
Frequency, Hz | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 |
---|---|---|---|---|---|---|---|---|
Sound insulation value of a wall made of hollow tongue-and-groove plates with a thickness of 80 mm (3 in), dB | 29.0 | 25.8 | 22.8 | 31.4 | 31.0 | 33.2 | 34.0 | 35.6 |
The total sound insulation of a wall made of hollow tongue-and-groove plates 80 mm (3 in) thick + ZIPS STS 23 mm, dB | 33.1 | 26.1 | 32.6 | 31.0 | 34.1 | 35.7 | 43.9 | 39.7 |
Frequency, Hz | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 |
Sound insulation value of a wall made of hollow tongue-and-groove plates with a thickness of 80 mm (3 in), dB | 35.4 | 38.1 | 40.6 | 41.4 | 44.2 | 46.0 | 47.6 | 48.9 |
The total sound insulation of a wall made of hollow tongue-and-groove plates 80 mm (3 in) thick + ZIPS STS Super 23 mm (0.3 in), dB | 41.9 | 46.9 | 50.0 | 52.5 | 54.3 | 54.3 | 55.6 | 58.4 |
Downloads
Product Information
Technical information
Didn't find what you were looking for? Just ask us!
Ask your question
If you couldn't find an answer to your question on this page, don't worry. Ask us and we will respond as soon as possible. We usually answer questions during the working day. You can also leave a review about the material. Your opinion is very important to us!Questions/reviews from site visitors
When mounting the ZIPS Slim panels, you don’t have to use Ultrakustik Tape 100/150 damping tape around the perimeter as is the case with other panels of the ZIPS line, since ZIPS STS principle of operation differs from other ZIPS solutions and there are no rigid connections of the sound insulation structure with the building enclosing structures.
The ZIPS STS panels are only suitable for sound insulation of thin partitions up to 10 cm (4 in) thick; adjoining walls (in case of a single-layer construction) are often thicker, ZIPS STS will be low efficient with such walls and is not recommended for use.
The use of ZIPS STS on both sides of a thin partition is not an optimal solution. Construction with ZIPS STS mounted on only one side is the most efficient.