- Materials
- Floor Soundproofing
- Ultrakustik Floor 100 Hydro
Ultrakustik Floor 100 Hydro
Ultrakustik Floor 100 Hydro is a two–layer professional solution to address two tasks at once: effective insulation of shock noise and waterproofing of floorings. The top layer based on a polymer-bitumen binder is used for additional waterproofing. While the bottom layer is a soundproof sheet to prevent propagation of shock noise. Request PriceWater-resistant underlayment with sound absorbing qualities
Ultrakustik Floor 100 Hydro is a dual–purpose material. It provides waterproofing for floating floors and significantly reduces shock noise.
It effectively reduces the shock noise level by up to 24 dB
Ultrakustik Floor 100 Hydro is used as an elastic layer in a sound insulating floating floor construction.
Acoustic felt retains its elastic properties under load and increases the shock noise insulation level of the floor structure by 24 dB.
The stability of the Ultrakustik Floor 100 Hydro characteristics is confirmed by long-term use of the material in construction and regular measurements at existing facilities.
Professional Waterproofing Material
Ultrakustik Floor 100 Hydro is designed to provide effective shock noise insulation in rooms prone to leaks, such as bathroom, kitchen, water closet.
The top layer of the underlayment is made of a reinforced polymer-bitumen membrane that protects the floor surface from leaks. Adding polymers to the bitumen binder provides high temperature resistance, durability, and strength of the waterproofing layer.
Video content for Ultrakustik Floor 100 Hydro
Maintenance info
Composition and description
Гидроизоляционный слой: усиленная полимерно-битумная мембрана.
Звукоизоляционный слой: акустический войлок из 100% полиэфирного волокна.
Хранение
Материал Ultrakustik Floor 100 Hydro должен храниться в вертикальном положении в один ряд по высоте с соблюдением правил пожарной безопасности и условиях, исключающих попадание на них атмосферных осадков и грунтовых вод.
Features of the material usage
Ultrakustik Floor 100 Hydro, в отличие от других гидроизоляционных- материалов , не требует наплавления, а просто укладывается на поверхность перекрытия единым полотном. Битумная поверхность материала должна быть обращена вверх, а края должны находить один на другой с нахлестом. Стыки между полотнами проклеиваются путем размягчения битума при помощи строительного фена или газовой горелки с узким пламенем.
Ready-to-use constructions with Ultrakustik Floor 100 Hydro
See allPhysical Properties
Physical and Technical Properties
Acoustics Properties
Acoustic tests have been performed by the NIISF RAASN acoustic measurements laboratory in Moscow
Индекс снижения уровня ударного шума, ΔLn,w под стяжкой с поверхностной плотностью 100-120 кг/м2
Downloads
Product Information
Didn't find what you were looking for? Just ask us!
Ask your question
If you couldn't find an answer to your question on this page, don't worry. Ask us and we will respond as soon as possible. We usually answer questions during the working day. You can also leave a review about the material. Your opinion is very important to us!Questions/reviews from site visitors
Use of Ultrakustik Floor 100 Hydro on the ceiling will not reduce shock noise from the neighbors from above. It would be most effective to apply the material under the floor screed at the neighbors’ from above.
Ultrakustik Floor 100 Hydro material can be applied throughout the apartment (in all types of premises).
Installation of Ultrakustik Floor 100 Hydro in 2 layers is not recommended, as it does not result in a significant increase in soundproofing.